Do you know the characteristics of gear honing machine?

Gear honing machine spindle and honing head are generally floating connection; But in order to improve the ability to correct the geometry of the workpiece, rigid joins can also be used.

Honing wheel and honed gear are honed under the clearance of the tooth side, which is called single-side meshing honing. It is generally used to eliminate the local high point and burr of gear, improve the surface roughness and slightly correct the precision of the workpiece before honing.

Honing wheel and honing gear are honed in the absence of tooth side clearance, known as double-sided meshing honing, its honing efficiency is high, can cut more tooth margin, can obviously modify the workpiece before honing precision, double-sided meshing honing can be used in the constant pressure "variable center distance" and variable pressure "fixed center distance" two ways.

In addition to honing on the gear honing machine, the honing wheel can also be slightly modified on the gear shaving machine and ordinary lathe. The speed and feed amount should be selected according to different specifications. Generally, the gear of medium modulus can be used for 200-500 RPM, and the final feed is 30-180mm/ min.

The grinding amount of the honing gear should be controlled at about 0.02mm, and the shorter the honing time, the better. Generally, the honing time of medium modulus gear should be about 2 minutes.

During the honing process, the stroke of the machine must not exceed the specified width to avoid damage to the honing wheel.

Honing wheel material is brittle, do not knock during use, to prevent damage, after use should be properly kept.